Tag: mp3 compression matlab code

Mp3: What is it really?


Free Download Mp4Gain
picture

Mp3: What is it really?

MP3 is a data format that gets its name from an algorithm
encoding called MPEG 1 Layer 3, which, in turn, is an audio compression system that allows you to store sound with a quality similar to that of a CD and with a very high compression ratio, on the order of 1:11

In practice, this means that about 11 audio CDs can be recorded on a CD-Rom, that is, approximately 150 songs.
The encoding system that MP3 uses is a loss algorithm. That is, the original sound and the one that we obtain later are not identical.

This is because MP3 takes advantage of the deficiencies of the human ear and eliminates all the information that we are not able to perceive. A multitude of studies of acoustic perception have been carried out, discovering that there are a series of effects that can aid the coding of sound with the aim of reducing as much as possible the amount of useless or redundant information. The most important are: The limits of hearing. Our ear only works with frequencies that go between 20 Hz and 20 Khz
approximately, so the remaining frequencies are disposable.

Masking effect.

It is one that occurs when two signals of similar frequency are
overlap. So we can only perceive the one that
it has more volume and, therefore, the one with a smaller volume is
liable to be removed

Stereo redundancy.

There are redundancies between the tonal and non-tonal components of the sound on the two stereo channels, and furthermore
below a certain frequency the human ear is not capable of
perceive the directionality of the sound, so below these
frequencies it is even possible to encode a single channel together with
complementary information to restore the spatial feeling for the other channel.

To carry out this “loss of information” action, a system called Subband Coding is used, a process by which the signal is broken down into subbands through a filter bank.

These subbands are then compared to the original using a psychoacoustic model that is responsible for determining which bands can be removed and which cannot.

Depending on the quality we want to obtain, more or less will be eliminated
bands. To end the process, the resulting subbands are quantized and encoded, and the final result is compressed using a standard algorithm, thus obtaining the resulting MP3 file. The encoding process is much more complicated than the decoding process, so it takes much longer to encode an MP3 file than to play it.

This perceptual coding algorithm was developed by the company MPEG (Moving Picture Expert Group) in conjunction with the Franunhofer Institute of Technology, and has been standardized as an ISO standard.


Free Download Mp4Gain
picture


Mp4Gain Main Window
picture


Mp4Gain Features
picture


Free Download Mp4Gain
picture

How much compresses an MP3

How much compresses an MP3

MP3 compression was an engineering response to the problem of digital storage and its large memory resource requirements. A conventional digital signal called PCM (Pulse Code Modulation) could easily require up to 10 Megabytes of memory per minute. This would represent about 30 Mb for a three minute song.
That requirement for storage memory could be handled by any computer if it were a few files, but when talking about three thousand songs the numbers become worrying. As if this were not enough, there is the problem of the Internet and its current transmission speeds. In the case of telephone lines, they have a limitation on their transmission bandwidth, so very large or heavy files represent a problem for conventional network traffic.

MPEG3 compression is considered the sound part of the original MPEG1 format that was intended for cinematography. Its abbreviations, Moving Picture Experts Group come from the committee that was created by the ISO Organization (international Standards Organization) and IEC ((International Electrotechnical Commission) to develop this format. Its principle is based on the Psychoacoustic model.

The human ear is known to discriminate sound according to its limitations. According to subject matter expert Paul Sellars, “If you hear solitary applause in a room, it will surely sound loud, but if it is preceded by the sound of a gunshot, it will sound fainter. The same thing happens in a room when you record a rock band, at a certain moment the strongest sound guitar in the mix, until the moment the drummer plays a certain cymbal, at which point the guitar will seem to attenuate “This phenomenon is used by the MP3 algorithm to perform its compression . I once explained it in the article that talked about ATRAC compression of the Minidisc.

The MP3 format divides the sound into 32 sub-bands, which allows it, according to the Psychoacoustic model on which it is based, to give priority to one element over another. At a certain moment in the material we can have a predominant low frequency sound of the kick drum, a high frequency of the cymbal and the vocalist at the same time. The algorithm is not that it eliminates two of them, but that it dedicates less storage space to them.

The mathematical part used with MP3 compression goes through the Shannon-Nyquist theorem, which states that for a wave to be properly reproduced in PCM digital format, its frequency of takes (Sampléo) must be twice the highest that is want to reproduce. In this case if we want to reproduce the frequency of 22.5KHz, (The auditory range oscillates between 20Hz-20KHz), our sampling frequency should be 44.1KHz.

The Fast Fourier Transform (FFT) is also used, which as we know can decompose a complex wave (PCM material) into a fundamental wave with its harmonics, all from its amplitude. The Discrete Cosine Transform is also used, which is based on the FFT but only using the real numbers

UNTIL IT IS RECOMMENDED

These formats will continue to be perfected and emerge, but it should be understood that despite being disseminated there may be details that will not be perceived. In other words, for serious Audio work this format should not be used.

Some improvements can be made by looking for compressors that have a better ratio, such as 224, 256 and 320 Kbps. You can also consider using VBR (Variable Bit Rate) encoding where musical passages with greater dynamic complexity are treated with a higher rate. storage in contrast to the simplest. However, this will bring other complications because not all the reproducers can handle them.