Bitrate and its calculation Bit rate (bit rate) Part 2


Free Download Mp4Gain
picture

Bitrate and its calculation Bit rate (bit rate) Part 2

bit rate

Let’s go back to the DVD story for a moment.

bit rate

When the first analog-to-digital converters appeared in capture card form, it was claimed that 60 minutes of video could be put on a DVD-R with no loss of quality. In the claimed presentation data of the DVD format, the maximum bit rate of the multiplexed stream is 9.8 Mbit / s. When DVD recorders appeared that were capable of digitizing an analog signal in high quality, it was said that the recorder could fit up to 125 minutes on a disc without losing quality and up to 90 minutes if you wanted to save sound in PCM format.

We test, we verify, we write from both disk and videotapes; there is no visual difference even during pauses and in frame by frame mode (if the recorder is good). The bit rate that the recorders give to the output of the digitized image is 9000 Kbps and sometimes a little more. Why is the math not the same as the DVD burner result?

Probably because we do the calculation for a constant bit rate, and the recorders can already digitize video with a variable bit rate and have appropriate compression algorithms. By setting the upper limit of the bit rate at 9000 Kbps, you can achieve a good picture in video segments with dynamic actions, while in other parts of the same video the value of the bit rate can reach 2000 Kbps. noticed that when you record a video or a photo with a digital camera, the files have different sizes? Once the initial parameter is set, the codec itself chooses the value of the bit rate. Optimal bit rate for DVD video Considering the fact that up to 120 minutes of video can be recorded on DVD-R without quality loss, we ask ourselves: how to do this? Let’s consider 2 ways: 1. If you are using a DVD burner, set it to “lossless quality” mode and set to record. If your video is 60 minutes long, the recorder will not stretch it by 4. 36GB and it will only take up half the free space. 2. If you use a capture card or TV tuner, first capture as described here and then compress the resulting file with a quality program with modern codecs and multiple passes (at least the same Freemake Video Converter) at the speed of dvd5 for 120 minutes (don’t forget the menu). Consider an option when your video is short and you are not going to burn it to DVD-ROM or if you want to burn multiple MPEG-2 files to disc at once without losing quality. Below is a table calculated mathematically on the basis that you can fit 120 minutes of video on 4464MB of disk space (no menus). There are a few things to keep in mind: The table is written for MPEG-2 files. The table is not written for previously compressed videos. These values ​​do not include a menu. Using different programs, you can get different results. The values ​​in the table may vary depending on the content of the video. If the program has a bit rate option then you need to set “VBR” (variable). The values ​​in the table are based on “lossless compression”. In this article, “lossless compression” refers to the viewing experience. In fact, in the analytical version, the word “compression” already denotes a loss of quality.
Источник: https://vseprost.ru/vybor-bitrejta-dlya-zapisi-multimedia.html


Free Download Mp4Gain
picture


Mp4Gain Main Window
picture


Mp4Gain Features
picture


Free Download Mp4Gain
picture

Bitrate and its calculation Bit rate (bit rate)

Bitrate and its calculation Bit rate (bit rate)

bit rate

Flow rate data per unit of time.

bit rate

Information flow is normally measured in bits and transit time in seconds (bit / s, bps). There are other quantities derived with the prefixes kilo- and mega- (kbit / s, kbit / s, kbps, Mbit / s, Mbps, Mbps). Bit rate is one of the main parameters of a video. Its value affects the size and quality of the video file. The bit rate is directly proportional to the quality and size of the file. The higher the bit rate, the better its quality and the larger the file size. Two types of speed must be distinguished: maximum bit rate: the maximum number of bits that can pass per unit of time, and bit rate: the bandwidth of the channel without delay.

Data stream compression modes

Constant Bit Rate Constant Bit Rate (CBR) is the encoding of the data stream, specified by the user and has a constant value throughout the length of the file. This mode improves compatibility and the ability to calculate more accurately, but can increase the size of the output file. Do not use this mode for dynamic scenes (sports programs, action movies, etc.) and when objects are moving in different directions. Variable Bit Rate (VBR) Variable Bit Rate is a mode in which the codec determines the amount of information stream transmitted based on the complexity of a given file segment. This mode produces the best quality in an optimal size and prevents flickering. The disadvantages of this method include only the unpredictability of the output file size and the possibility of incompatibility. Variable bit rate is actively used for burning Blu-Ray and DVD discs, where there is no limitation on the size of the file as such. Average Bit Rate (ABR) Average Bit Rate is a combination of variable and constant bit rates set by the user. Unlike variable bitrate, the data stream varies within strict limits and does not reach the minimum and maximum values. This allows you to predict the output file size much more accurately than VBR and improve video quality in fast-moving video scenes. The method was applied in the network. This mode is sometimes used to compress audio.

Bitrate calculation

Having mastered what the bit rate is and having disassembled the compression modes of the flow of information, we can proceed to the independent calculation of the bit rate. Let’s establish the conditions of the problem: video: home video 120 minutes long sound: present; menu: necessary; DVD-R Media (DVD + R) 4.36 GB; Output format: DVD (MPEG-2) DVD-R size: 4.36GB = 4464MB. Size is critical, so we will be calculating from 4300MB for several reasons: 1. Bitrate cannot be accurately calculated and the file may be larger than planned. All full disk space sometimes leads to improper disk startup. 3. Many programs are recoding based on this value. We subtract another 300MB for the menu and the audio track (if your sound is not in PCM format, whose bit rate is much higher, and if you don’t plan to create multiple audio tracks) and we get 4000MB. 4000: (120 * 60) = 0.556 Mbps = 0.556 * 8 = 4.444 Mbps = 4.444 * 1024 = 4551 Kbps. For a high-quality DVD-Rip, this value is ideal, but for MPEG-2 it is barely supportable. The fact is, different video formats need different bitrate values ​​for an acceptable picture. You can try to play this video and if there are dynamic moments, you will see artifacts in the shape of squares in the video. It follows from this that you need to reduce the length of the file to about 60 minutes or look for other compression methods.