Bitrate and its calculation Bit rate (bit rate)
Flow rate data per unit of time.
Information flow is normally measured in bits and transit time in seconds (bit / s, bps). There are other quantities derived with the prefixes kilo- and mega- (kbit / s, kbit / s, kbps, Mbit / s, Mbps, Mbps). Bit rate is one of the main parameters of a video. Its value affects the size and quality of the video file. The bit rate is directly proportional to the quality and size of the file. The higher the bit rate, the better its quality and the larger the file size. Two types of speed must be distinguished: maximum bit rate: the maximum number of bits that can pass per unit of time, and bit rate: the bandwidth of the channel without delay.
Data stream compression modes
Constant Bit Rate Constant Bit Rate (CBR) is the encoding of the data stream, specified by the user and has a constant value throughout the length of the file. This mode improves compatibility and the ability to calculate more accurately, but can increase the size of the output file. Do not use this mode for dynamic scenes (sports programs, action movies, etc.) and when objects are moving in different directions. Variable Bit Rate (VBR) Variable Bit Rate is a mode in which the codec determines the amount of information stream transmitted based on the complexity of a given file segment. This mode produces the best quality in an optimal size and prevents flickering. The disadvantages of this method include only the unpredictability of the output file size and the possibility of incompatibility. Variable bit rate is actively used for burning Blu-Ray and DVD discs, where there is no limitation on the size of the file as such. Average Bit Rate (ABR) Average Bit Rate is a combination of variable and constant bit rates set by the user. Unlike variable bitrate, the data stream varies within strict limits and does not reach the minimum and maximum values. This allows you to predict the output file size much more accurately than VBR and improve video quality in fast-moving video scenes. The method was applied in the network. This mode is sometimes used to compress audio.
Bitrate calculation
Having mastered what the bit rate is and having disassembled the compression modes of the flow of information, we can proceed to the independent calculation of the bit rate. Let’s establish the conditions of the problem: video: home video 120 minutes long sound: present; menu: necessary; DVD-R Media (DVD + R) 4.36 GB; Output format: DVD (MPEG-2) DVD-R size: 4.36GB = 4464MB. Size is critical, so we will be calculating from 4300MB for several reasons: 1. Bitrate cannot be accurately calculated and the file may be larger than planned. All full disk space sometimes leads to improper disk startup. 3. Many programs are recoding based on this value. We subtract another 300MB for the menu and the audio track (if your sound is not in PCM format, whose bit rate is much higher, and if you don’t plan to create multiple audio tracks) and we get 4000MB. 4000: (120 * 60) = 0.556 Mbps = 0.556 * 8 = 4.444 Mbps = 4.444 * 1024 = 4551 Kbps. For a high-quality DVD-Rip, this value is ideal, but for MPEG-2 it is barely supportable. The fact is, different video formats need different bitrate values for an acceptable picture. You can try to play this video and if there are dynamic moments, you will see artifacts in the shape of squares in the video. It follows from this that you need to reduce the length of the file to about 60 minutes or look for other compression methods.
